Skip to main content

Turniput

The Input1 introduces the Turniput.

The Turniput brings the full power of the Turnip Network to your lightshow.

Using the powerful web interface you can build interactions with limitless possibility.

  • Start a Sequence / Playlist in FPP (either specific or random)
  • Turn the FPP volume on for a set period of time
  • Engage a BaldrickDMX preset
  • Turn on / off a BaldrickSwitchy port
  • Activate A specific test mode on a Baldrick8
  • Run a more advanced FPP command
  • Send a webhook request

The Turniput is designed not only to be used with Buttons but anything that can complete a circuit.

  • Beam Break
  • Reed Switch
  • Motion Sensor
  • Distance Sensor
  • Sound Sensor

If you are using the Turniput with a button that has an LED in it our lamp controls allow you to enable the status of the LED depending on the Turniput status - On, Off or Breath.

A Turniput has two states, press and hold. Both can be configured to do different things and after each state you can enable a timeout for x seconds.